If you’re wondering how to tell the difference between a diamond created by the HPHT method and a CVD one, you’ve come to the right place. This article will discuss the key differences between cvd vs hpht diamonds and help you find out which method is best for your needs. The main difference between these two techniques is the way that each is formed. The HPHT method was initially developed to produce colorless gems.

Identifying CVD and HPHT diamonds

There are some differences between natural and man-made diamonds, and the ability to identify them is crucial for purchasing the most expensive jewel. For example, identifying natural diamonds is very difficult because they are prone to internal whitish graining and reflections. In contrast, identifying HPHT diamonds requires the use of specialized equipment and experienced personnel. There are two institutions that set standards for gemstones and have developed ways to identify them.

During the manufacturing process, two gases are used: methane and carbon. Methane is used to make HPHT diamonds, and while it is possible to produce colorless diamonds using HPHT, most are brown or yellowish. In contrast, the diamond seed is treated in a CVD chamber that contains hydrogen and carbon, and in some cases, nitrogen. This mixture can produce yellowish or blue man-made diamonds.

While natural diamonds are colorless, synthetic ones are not. The brown color is usually removed from CVD-grown diamonds before faceting them. In addition, most of the colorless stones produced by CVD-process were once brown gems, so this process creates a distinct colorlessness. Luckily, GIA and IGI have equipment that can help distinguish natural diamonds from CVD ones.

Identifying hpht diamonds

If you’re unsure if a diamond is synthetic or natural, try looking for metallic inclusions. This is one of the main differences between HPHT diamonds and synthetic diamonds. HPHT diamonds are usually clear and contain no metallic luster. Natural diamonds, on the other hand, typically have a mosaic or cross-hatched pattern of interference colours caused by diamond stress. The diamonds created by CVD synthesis, on the other hand, display banded “strain” patterns and lack.

Because CVD and HPHT synthetic diamonds are produced in a lab, it is difficult for an ordinary consumer to identify these stones. However, gemological laboratories have developed special equipment and methods for identifying diamonds. They have databases that contain information about all known diamonds and can even spot emerging trends. To distinguish between HPHT diamonds and natural diamonds, manufacturers are required to use the qualifier “lab-grown” when advertising them.

The HPHT coloured synthetic diamonds are often characterized by a cross-shaped pattern on their crown and pavilion facets. These patterns are caused by the presence of nitrogen in the crystals. Natural diamonds, however, will display this pattern occasionally, but this is rare. In addition to this, HPHT diamonds will often have a striated pattern in their facets. While HPHT diamonds have a more uniform coloration, natural diamonds will occasionally display this characteristic.

Identifying cvd diamonds

Identifying CVD diamonds is an art, and the process used is very specific and technical. However, it does work and can differentiate between natural diamonds and CVD diamonds. The following steps can be used to determine if a diamond is a CVD. To begin, you must first determine whether it is colorless or not. A natural diamond will display a yellowish green fluorescence when exposed to long-wave UV light.

The term “chemical vapor deposition” refers to a process whereby a gas is deposited on a substance. The chemical reactions that occur during this process produce a diamond. Depending on the formation process, diamonds are classified as either mined or synthetic. Natural diamonds form under the earth’s surface over billions of years, and are the ones that are mined today. Using a diamond view machine, you can examine the differences between natural and synthetic stones. Using heavy ultraviolet light, Hpht vs cvd diamond will produce a dark red fluorescence.


When choosing a diamond, you must take into account its cost. A CVD diamond will cost you between twenty and thirty percent less than a natural diamond. This is due to the fact that CVD diamonds do not require the deep excavation, long supply chains, and monopolistic price manipulation that are common with natural diamonds. A CVD diamond, however, has no inherent flaws and is an ideal choice for jewelry.



Previous articleConflict Free Diamonds Why You Should Buy Conflict Free Diamonds
Next articleNephrotic Syndrome


Please enter your comment!
Please enter your name here